4x14m Gantry CNC Plasma Flame Metal Cutting Machine cutter (3000 x 12000mm)
Model No.︰-
Brand Name︰Gauss
Country of Origin︰-
Unit Price︰US $ 7100 / pc
Minimum Order︰1 pc
Product Description
1.Equipment function:
(1)Cutting object：sheets and plates
(2)Cutting material:Stainless steel, carbon steel, other non-ferrous metal .
(3) Cutting technology ：Cut any shape on a plate,cut off,
2.Technical index:
|
No. |
Items |
Parameters |
|
1 |
Effective cutting range |
3000*12000mm |
|
2 |
Flame torch |
One group |
|
3 |
Plasma torch |
Two groups |
|
4 |
Arc voltage increase |
One |
|
5 |
Plasma power supply |
Reserve |
|
6 |
Cutting torch lifting distance |
200mm |
|
7 |
Flame cutting speed |
0-1000mm/min |
|
10 |
Plasma cutting speed |
0-6000mm/min |
|
12 |
Automatic ignition device |
One |
|
13 |
Motor |
Servo motor Panasonic |
|
14 |
Controller |
Shanghai Jiaoda |
|
15 |
Drive mode |
Bilateral drive |
|
16 |
System console direction |
According to user requirements |
|
17 |
Transmission pipeline |
Towline lateral, vertical towline |
|
18 |
Auto-precision |
≤±1.0mm |
|
19 |
Longitudinal linear precision |
±0.2mm/10m |
|
20 |
Integrated precision machine
|
|
|
21 |
Length (four) |
±0.5mm |
|
22 |
Diagonal error |AD-BC| |
±0.5mm |
|
23 |
Back to the origin of deviation |
±0.2mm |
|
24 |
Intersection deviation |
±0.5mm |
|
25 |
Inverse linear deviation |
±0.2mm |
|
26 |
Cutting surface quality (roughness) (optional δ = 25 plates) |
Rz(um)=70+1.2a Visual: Roughness 12.5 |
|
27 |
Squareness and inclination tolerances |
μ(mm)=0.4+0.015a Tools: angle ruler |
|
28 |
Straight angle |
4M × 20M square diagonal error ≦ ± 0.2 mm / 10m |
|
29 |
Walks nonstraightness |
Longitudinal ≦ ± 0.2mm / effective length Transverse ≦ ± 0.2mm / effective length |
|
30 |
Torch angle error |
≦±0.5º |
|
31 |
Equipment Noise |
≤80 db |
3.Working conditions:
|
4.1 |
Supply voltage / frequency |
3×380v±10%/50Hz 220v±10%/50Hz |
|
4.2 |
compressed air |
Dry and oil-free; pressure: 0.8Mpa flow: 1 m3/h |
|
4.3 |
Gas type |
Propane, acetylene, propylene, natural gas. |
|
4.4 |
ambient temperature |
0-50 DEG C |
|
4.5 |
relative humidity |
<90% without condensation |
|
4.6 |
Surrounding environment |
No great impact within 5 meters of ventilation. |
|
4.7 |
Earthquake grade |
Fortification by grade 6 |
4.Buyer obligations:
machine tool installation site customer site requirements (by the customer before the arrival of equipment ready)：
|
No. |
Content |
|
1 |
The following terms do not fall within the scope of supply, and the customer may configure them individually according to their own needs 1. the foundation for the installation of rails, such as heavy beams, cement concrete foundations, etc. (according to the manufacturer's basic drawings, requires the user to make it himself). 2. cutting platform (in accordance with the manufacturer's basic drawing requirements of the user to make their own). The 3. longitudinal lines (dragging chain bracket provided by the manufacturer based requests made by the users themselves). 4. primary power supply and its side wiring (supplied by the manufacturer as requested). 5. primary gas supply (supplied by the manufacturer as requested). |
|
2 |
Power supply capacity: no less than 12 KVA |
|
3 |
Power supply requirements of numerical control system and electric control cabinet: 1. voltage AC220V single phase + 10% 2. frequency 50Hz 3. power 3 kW Requirements for power supply of plasma cutting power: 1. voltage AC380V three-phase + 10% 2. frequency 50Hz The 3. power is determined by the size of the plasma power source Other requirements: (1) the three-phase voltage stability is less than + 5% (2) unbalance of three-phase power supply is less than 2.5% (3) do not meet the above-mentioned power requirements, it is recommended to use the regulated power supply. (4) the power supply voltage is not allowed to sudden jump and sudden power failure, otherwise it is easy to damage the equipment and CNC system; (5) good grounding (earthing resistance is less than 10 ohms). |
|
4 |
Flame cutting gas requirements: Type of gas: acetylene, propane, propylene, natural gas. Gas pressure 0.05-0.1MPa Cutting oxygen pressure 0.5-0.8MPa Preheating oxygen pressure 0.40.6MPa |
|
5 |
Compressed air supply requirements: (1) gas supply capacity: 4500L/H; (2) air supply pressure: over 7MPA; (3) the dew point temperature of less than 5 degrees Celsius, the oil content of less than 0.003ppm solid particles less than 0.01 microns (4) recommend the use of oil-free air compressor, freeze dryer and precision filter (the system can not have rusty components), conditional increase of a gas tank. |
|
6 |
Cutting plate: smooth, flat, rolled evenly, reaching ISO or domestic Baosteel standard. |
|
7 |
Requirements for loading and landing of CNC cutting machines: (1) temperature requirements: -10-50 DEG C (2) humidity requirements: <90% without condensation (3) the site should fully meet the needs of equipment placement, it is recommended to cut off the plasma power supply, to avoid the interference of plasma power on the system. |
|
8 |
Equipment operators should have high school or technical secondary school education level, should have the experience of operating computer and general CNC machine tools, equipment should be equipped with a programming computer.
|
8.After-sales service Guaranty
* The warranty provides shall be 12 months from the date of satisfactory installation of equipment for components/workmanship. During one year warranty period, the supplier shall be provide free repair service in case of failure due to defective part/ component and replace defective part/component free of cost.
* During the 1year warranty period, the Supplier shall be provide free repair service for failure not caused by personal factors (the local transport, Visa, air ticket, food, accommodation, translation, internet, communication and travel allowance etc for foreign users should be borne by the User. Such expenses are not included in the quotation) and free replacement for various parts damaged not due to personal factors (sent to foreign users by mail or express, express and the expense borne by buyers). For the repair for failure occurred not within the warranty period, certain charges will be collected.
* The NC system possesses the standard functions that meet the basic functions of the control system and optional functions needed for future expanded welding. The mechanical part adopts combined, replaceable and standardized structure. Through upgrading of software and hardware, and repair and replacement of mechanical unit, the equipment can maintain long term precision and normal work.
*ØSoftware upgrades and process improvements shall be provided free of cost by supplier to buyer periodically
5. Packing And Marking
Ø The supplier shall have the goods suitably packed and shall take measures to protect the goods from moisture, rain, rust, corrosion, shock, & any other hazard’s in export sea standard worthy palletized packing.
Ø The supplier shall mark the following on the four adjacent sides of each package of the goods with indelible paint in conspicuous printed words in the English language.
² Contract Number/Destination/Name Of Equipment And Item Number/Case No./Bale No./ G.W / N.W(KG)
Ø The following documents shall be enclosed in each package of the goods:
² Detailed packing list in 2 copies; Quality certificate in 2 copies;
² Technical documents for relevant equipment in one copy.
Ø Should the goods be damaged or lost due to supplier’s improper packing and / or inadequate protective measures before shipping, the supplier shall be responsible for the repair, replacement of compensation.
6.Other Description
Ø This agreement is annexure of the commercial contract, and have the same legal effect with commercial contracts;
Ø This Agreement entered into force upon signature by the relevant parties
Ø In case of other matters not covered, will be an amicable settlement to friendly discussion.
Payment Terms︰ TT / LC / DP